Sandpaper is a widely used and beneficial product with a high effect in the world of woodworking, metalworking, etc. It is used for glossy, polished, smooth, level, finished and shaped wood. It can also be used in several other materials such as metals, plastics, etc. What grit sandpaper for drywall seams to window glass, and many more applications can benefit from sandpaper applications. Here’s the question of how to use sandpaper for wood?
The benefits of wood sanding: Sanding is used for all of the above reasons, but also for removing the outer layer of the material, such as paint. First of all, sandpaper is only made by gluing the actual sand grains to one side of the paper; However, the manufacture of modern sandpaper now includes a completely different abrasive materials such as silicon carbide sandpaper, alumina oxide sandpaper, ceramic sandpaper, etc. For wood, alumina is the best. Never use silicon carbide on wood materials. In the previous blog, we discussed the different grades and types of sandpaper. Whatever your project you plan to do, it’s important to use the right grade of sandy paper. Keep in mind that lowest grit sandpaper are more natural and remove more material, while higher grit are finer and remove less.
Here’s how to sand wood: 1.Figure out what grit sandpaper for wood you need. For smoother surfaces, use finer grit (i.e. 100 particle size), while rough surfaces use lower grit for wood(i.e. 60 particle size). 2.Choose whether you want to apply sanding disc with your hands and fingers, or paste sandpaper to the surface of the wood before applying it to the sandstone. For large surface areas, blocks are a good choice. 3.Always sand along the grit. Facing back to the texture can result in uneven finishes or rough patches. 4.Use smooth, even strokes when sanding in the direction of the grain. Never use too much force or pressure to ensure a controlled surface treatment. 5.If you start with coarse grit, it is appropriate to switch to finer grit after the initial sanding is complete. This allows for more control and better artistry. This is a good time to use your fingers instead of sanding blocks. 6.Sand until the desired finish is reached. Being as smooth as glass is a good finish. 7.When finished, wipe clean with a clean adhesive cloth. Fix any imperfections with 120 grit or more sandpaper.