Skip to content

How to use and storage the sanding disc

I believe that friends who often use sandpaper know that velcro disc is used for industrial grinding or polishing, but few people know how to use velcro disc? What kind of storage or maintenance should be performed on velcro disc? You must be very curious.

First of all, like sandpaper, the grades and specifications of velcro disc (referred to as grit numbers professionally) are different, generally divided into three categories: coarse, medium and fine. The higher the grit number of the sandpaper, the smoother the surface of the sandpaper. When using velcro disc, you can enclose the sandpaper in blocks, and then let the sanding side face out, fix it with staples or glue (if you choose glue, be sure to choose good quality, otherwise it will affect the grinding effect). Then, apply pressure with both hands. Move the velcro disc back and forth into a linear motion, gradually polish the entire surface of the product you need to polish, and then take a moment to polish the edges and corners at the right time. Dust equipment is sucked away. The whole grinding process is basically over.

We’ve mentioned how to store sanding disc, after one or several used it, or unsed, it should be stored for reuse. This requires us to carry out special preservation and maintenance of it.

1. Temperature and humidity requirements: velcro disc should not be stored in places with large changes in temperature and humidity. The ideal temperature is: 18-220 ° C; The environment will cause a certain degree of mildew to the flocking. Although grinding does not have much impact, it affects the appearance.

2. Hanging: In the past, there were always professionals who would recommend it to everyone that it should be hung for 1-3 days before using velcro disc, in order to prevent bending. However, due to the development of science and technology, including the improvement of our production technology, the basic customers can ignore this process. We use our own special technology to improve the quality of the entire product. When you get the flocking sandpaper, you can It is no longer bent.

3. In addition, the product should be kept in the warehouse, cool, dry and ventilated. Customers should also check accordingly when receiving velcro disc. Regarding quality inspection, we mainly check the following aspects: appearance inspection, mainly to check whether the joint is flat and firm; whether there are holes, sand lumps, lack of sand, glue spots, wrinkles and other unexpected conditions on the surface; whether the margins are regular and whether there are any Crack, if there is a small crack in the edge, will it affect the polishing effect and use after cutting it off.

Leave a Reply

Your email address will not be published. Required fields are marked *